Siemens COM32 Betriebsanweisung PDF herunterladen (Seite 24)

Configuring ION Setup ION Setup User Guide

4. Click OK.

Either the Connection Type dialog box or the Network Viewer appears. See

“Single Device Mode and Network Mode” on page 42 for more information on

the modes of operation.

Switching between startup modes

The following sections provide instructions on how to switch from your current

startup mode.

Switching from Power User Mode

To switch from Power User mode to another startup mode:

1. Ensure that there are no non-default users are configured in ION Setup. To do

this, click Tools > Options and select the Security tab. Ensure there are no

users in any of the user groups other than the default supervisor user in the

Supervisor group.

2. Click on the View tab in the same dialog box and select the mode you want to

switch to from the Startup Mode list.

3. Click OK. The next time you launch ION Setup, it will use the selected startup

mode.

Switching from First Time User / Network Mode

To switch from First Time User / Network mode to another startup mode:

1. Click Tools > Options and select the View tab.

2. Select the mode you want to switch to from the Startup Mode list.

3. Click OK. The next time you launch ION Setup, it will use the selected startup

mode.

Switching from Metershop Technician Mode

To switch from Metershop Technician mode to another startup mode:

1. Launch ION Setup. In the Connection Type dialog box, connect to a device

or select Off-Line then select a firmware from the list (it does not matter which

one).

2. Click Exit on the Setup Assistant dialog box (if it appears) then click No when

prompted about saving your offline configuration or connecting to another

device.

3. Click Tools > Options and select the View tab.

Selecting or clearing this box

determines whether you connect to a

single device or a network of devices

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 125 126

Keine Kommentare

Siemens COM32 Betriebsanweisung Seite 24