Siemens COM32 Betriebsanweisung PDF herunterladen (Seite 45)

ION Setup User Guide Adding and Configuring Devices

Using Serial Communications

To connect using serial communications, click Serial in the Connection Type

dialog box and select the appropriate serial port. Click the Settings button to set

General and Timings configurations.

Optical probe communications

To communicate with a meter through an optical probe, follow the setup

instructions supplied by the optical probe manufacturer. Use the probe to connect

the meter to the laptop/computer running ION Setup.

NOTE

For self-powered optical probes, you can change the DTR setting to “Probe Ctrl” to turn on the probe

only when it is communicating with the meter. Refer to the section, “Timings” on page 57 for a

description of each setting.

Refer to the Optical Magnetic Couplers technical note for more information on

using optical probes with your device.

Using Modem Communications

To connect via modem, select Modem in the Connection Type dialog box, enter

the modem’s phone number. Click the Settings button and enter the modem

settings. Click the Modem Profile button and follow the instructions on the Modem

Profile Selection Wizard to configure the local and remote modem properties.

NOTE

To stop modem communications (for example, if the remote modem is not responding), press the ESC

key on your keyboard. When you do this, ION Setup attempts to stop modem communication.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 125 126

Keine Kommentare

Siemens COM32 Betriebsanweisung Seite 45