SINAMICS G120
Inverter chassis units 0.37 kW to 132 kW (0.5 hp to 200 hp)
Load-side power components
Output reactors
3/72
Siemens D 11.1 · 2008
3
■
Overview
Example: Output reactors for Power Modules frame sizes FSA and FSB
Output reactors reduce the voltage loading on the motor wind-
ings. At the same time, the capacitive charge/discharge cur-
rents, which place an additional load on the power section when
long motor cables are used, are reduced.
Output reactors are only provided for the PM240 and PM250
Power Modules. An output reactor is not required for the PM260
Power Module due to its integrated sine-wave filter.
The maximum permissible output frequency is 150 Hz when an
output reactor is used – the pulse frequency must not exceed
4 kHz.
The output reactor must be installed as close as possible to the
Power Module.
Output reactors are approved for use only in conjunction with
“Vector” and “
V/f control” modes.
Output reactors which are optionally available depending on the Power Module used
U = Base component
S = Lateral mounting
I = Integrated
– = Not possible
Frame size
FSA FSB FSC FSD FSE FSF
PM240 Power Module with integrated brake chopper
Available frame sizes ✓ ✓ ✓ ✓ ✓ ✓
Load-side power components
Output reactor
U U U S S S
Sine-wave filter
Available soon Available soon Available soon Available soon Available soon Available soon
PM250 Power Module with line-commutated energy feedback and integrated line filter class A
Available frame sizes – – ✓ ✓ ✓ ✓
Load-side power components
Output reactor
– – U S S S
Sine-wave filter
– – Available soon Available soon Available soon Available soon
PM260 Power Module with line-commutated energy feedback and integrated sine-wave filter
Available frame sizes – – – ✓ – ✓
Load-side power components
Output reactor
1)
– – – – – –
Sine-wave filter
– – – I – I
1)
PM260 Power Modules do not require output reactors as they are already
equipped with sine-wave filters.
Kommentare zu diesen Handbüchern