Siemens EF 785 Series Betriebsanweisung PDF herunterladen (Seite 60)

59

Using a handset as a room monitor

Gigaset SL785 / GBR / A31008-M2009-L101-1-7619 / registr_sett.fm / 02.12.2008

Version 4, 16.09.2005

Internal listening in

The line is engaged with an external call.

Your screen will display information to

that effect. You want to listen in to the

external call.

c Press and hold the talk key.

You can listen in to the call. All participants

hear a signal tone. During this time, this

handset displays the Conference message

and it is not possible to dial another

number from this handset.

Ending listening in

a Press the end call key.

All participants hear a signal tone.

If the first internal participant presses the

end call key a, the handset that has

"listened in" remains connected to the

external participant.

Changing the name of a handset

The names "INT 1", "INT 2" etc. are

assigned automatically at registration.

You can change these names. The name

must be no more than 10 characters. The

changed name is displayed in every hand-

set's list.

u Open the list of handsets. Your

own handset is indicated by

f

.

s Select handset.

§Options§ Open menu.

Rename

~ Enter name.

§Save§ Press the display key.

Changing a handset's internal

number

A handset is automatically assigned the

lowest free number when it is registered.

If all slots are occupied, number 6 is over-

written if this handset is in idle status. You

can change the internal number of all reg-

istered handsets (1–6).

u Open the list of handsets. Your

own handset is indicated by

f

.

§Options§ Open menu.

Assign Handset No.

Select and press

§OK§.

r Select number. Only numbers

that have not been assigned

are displayed.

§Save§ Press the display key to save

the input.

Using a handset as a

room monitor

If the room monitor is activated, a previ-

ously saved destination number is called

as soon as a set noise level is reached. You

can save an internal or external number in

your handset as the destination number.

All of the handset keys are deactivated,

with the exception of the display keys.

The room monitor call to an external

number stops after around 90 seconds.

The room monitor call to an internal

number (handset) stops after approx. 3

minutes (depending on the base station).

When the room monitor is activated, all

keys are locked except the end call key.

The handset's speaker is muted.

When the room monitor is activated,

incoming calls to the handset are indi-

cated without a ring tone and are only

shown on the screen. The display and key-

pad are not illuminated and advisory

tones are also turned off.

If you accept an incoming call, the room

monitor is suspended for the duration of

the call, but the function remains acti-

vated.

If you deactivate then reactivate the hand-

set, the room monitor remains activated.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 88 89

Kommentare zu diesen Handbüchern

Keine Kommentare