Siemens AC75 Bedienungsanleitung PDF herunterladen (Seite 24)

100

101

AC75 AT Command Set

1.5 Supported character sets

AC75_ATC_V01.002 Page 24 of 569 10/30/06

Confidential / Released

In the event that an MS receives a code where a symbol is not represented in Figure 1.2, Extension character

table of GSM 03.38 alphabet the MS shall display the character shown in the main default 7 bit alphabet table

(see Figure 1.1, Main character table of GSM 03.38 alphabet).

1.5.2 UCS2 and GSM data coding and conversion for SMS text mode

This section provides basic information on how to handle input and output character conversion for SMS text

mode and Remote-SAT if internal (TA) and external (TE) character representation differ, i.e. if the Data Coding

Scheme and the TE character use different coding.

1.5.2.1 Implementing output of SIM data to Terminal (direction TA to

TE)

Note: The ratio of SIM bytes to output bytes is given in parentheses.

Case 1

Every GSM character is sent to the TE as it is (8-bit value with highest bit set to zero).

Example: 47'H, 53'H, 4D'H → 47'H, 53'H, 4D'H, displayed as "GSM"

Case 2

Every data byte is sent to the TE as 2 IRA characters each representing a halfbyte.

Example: B8'H (184 decimal) → 42'H, 38'H, displayed as "B8"

Case 3

Every 16-bit UCS2 value is sent to the TE as 4 IRA characters.

Example: C4xA7'H (50343 decimal) → 43'H, 34'H, 41'H, 37'H, displayed as "C4A7"

Problem: An odd number of bytes leads to an error because there are always two bytes needed for each USC2

character

Case 4

Every GSM character is sent to the TE as 4 IRA characters to show UCS2 in text mode.

Example: 41'H ("A") → 30'H, 30'H, 34'H, 31'H, displayed as "0041"

Case 5

Every data byte is sent to the TE as IRA representation of UCS2 (similar to case 4).

Example: B2'H → 30'H, 30'H, 42'H, 32'H, displayed as "00B2"

Case 6

Every 16-bit value is sent to the TE as IRA representation of it. It is assumed that number of bytes is even.

Example: C3x46'H → 43'H, 33'H, 34'H, 36'H, displayed as "C346"

Used character set DCS = 7 bit

GSM

DCS = 8 bit

Data

DCS = 16 bit

UCS2

GSM Case 1

GSM (1:1)

Case 2

8 bit to IRA (1:2)

Case 3

UCS2 to IRA (2:4)

UCS2 Case 4

GSM to IRA (1:4)

Case 5

8 bit to IRA (1:4)

Case 6

UCS2 to IRA (2:4)

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 568 569

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens AC75 Bedienungsanleitung Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75