Siemens AC75 Bedienungsanleitung PDF herunterladen (Seite 259)

100

101

AC75 AT Command Set

10.1 AT^SICS

AC75_ATC_V01.002 Page 259 of 569 10/30/06

Confidential / Released

Supported data call type values in <conParmValue> for <conParmTag> value "dataType".

“0“ ISDN

[“1“] Analog

Supported authentication mode values in <conParmValue> for <conParmTag> value "authMode". Changing

the <conParmValue-authMode> will restore the password to its default (*****).

“none“

[“PAP“]

“CHAP“

“MsChapV1“

Fixed Network User Rate (FNUR) set with <conParmValue>.

This parameter is only required for 14.4 kbit/s UDI calls (Unrestricted Digital Information). Changes are recom-

mended only if an originated CSD call fails. The choice as to which of the values to use depends on the GSM

network and the location. Users should be aware that even the same operator may apply varying FNUR config-

urations in different regions.

See also AT^SFNUR command.

0 not applicable

[1] 9.6 kbit/s

214.4 kbit/s

319.2 kbit/s

428.8 kbit/s

538.4 kbit/s

648.0 kbit/s

756.7 kbit/s

864.0 kbit/s

Notes

• Before opening a service profile based on a connection profile recently used, check with AT^SICI that the

previous connection was properly closed. If AT^SICI confirms that the connection profile is in <conState>

0 (Down) the connection profile may be used again.

• If a GPRS network does not support or is not correctly configured for automatic DNS address assignment the

TCP/IP stack cannot resolve fully qualified domain names. In this case, a warning message will be returned

when trying to open an Internet service configured for automatic DNS address assignment.

10.1.1 Example: Default values of a CSD connection profile

As stated earlier, the "conType" selected with AT^SICS determines all other matching profile parameters related

to this "conType". Once "conType" is set in a new profile, the default values of all other related parameters are

assumed. To view the default settings you can use the read command AT^SICS?.

<conParmValue-dataType>

(str)

<conParmValue-authMode>

(str)

<conParmValue-fnur>

(num)

at^sics=1,conType,CSD

Select connection type CSD, identified by <con-

ProfileId>1

at^sics?

Query current profiles.

1 2 ... 254 255 256 257 258 259 260 261 262 263 264 ... 568 569

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens AC75 Bedienungsanleitung Seite 259

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75