Siemens AC75 Bedienungsanleitung PDF herunterladen (Seite 380)

AC75 AT Command Set

13.11 AT+CNMI

AC75_ATC_V01.002 Page 380 of 569 10/30/06

Confidential / Released

2 SMS-DELIVERs, except class 2 messages and messages in the message

waiting indication group (store message) are routed directly to the TE using

unsolicited result code:

3 Class 3 SMS-DELIVERs are routed directly to the TE using unsolicited result

codes defined in <mt>=2. Messages of other data coding schemes result in

indication as defined in <mt>=1.

Rules for storing received CBMs depend on the relevant data coding method (refer to GSM 03.38), the setting

of Select CBM Types (AT+CSCB) and this value:

[0]

(&F)

No CBM indications are routed to the TE.

2 New CBMs are routed directly to the TE using unsolicited result code:

3 Class 3 CBMs are routed directly to TE using unsolicited result codes defined

in <bm>=2.

[0]

(&F)

No SMS-STATUS-REPORTs are routed to the TE.

1 SMS-STATUS-REPORTs are routed to the TE using unsolicited result code:

2 If SMS-STATUS-REPORT is routed into ME/TA, indication of the memory

location is routed to the TE using unsolicited result code:

[1]

(&F)

TA buffer of unsolicited result codes defined within this command is cleared

when <mode> changes from 0 to 1...3.

Integer type; value in the range of location numbers supported by the associated memory

Notes

• Parameters <mt>=2,3 and <ds>=1 are only available with GSM phase 2+ (see AT+CSMS=1). Incoming SMs

or Status Reports have to be acknowledged with AT+CNMA=0 when using these phase 2+ parameters.

• Requirements specific to Multiplex mode:

In multiplex mode (AT+CMUX=0) only one channel can use a phase 2+ parameter. The parameter for <mt>

and <ds> on the other channels have to be set to zero. If either a SM or a Status Report is not acknowledged,

all AT+CNMI parameter in all channels will be set to zero.

• If the ME operates on different instances (MUX channels 1, 2, 3 or ASC0/ASC1) avoid different settings for

routing and indicating short messages. For example, if messages shall be routed directly to one instance of

the TE (set with AT+CNMI, AT^SSDA), it is not possible to activate the presentation of URCs with AT+CMER

or AT+CNMI on another instance. Any attempt to activate settings that conflict with existing settings on

another interface, will result in CME ERROR, or accordingly CMS ERROR.

• Handling of Class 0 short messages:

If the host application is provided with a display and AT^SSDA=1 has been set Class 0 short messages can

be displayed immediately.

If the host application does not include a display, ME handles Class 0 short messages as though there was

no message class, i.e. it will ignore bits 0 and 1 in the <dcs> and normal rules for exceeded memory capacity

shall apply. This approach is compliant with GSM 03.38 .

• The parameters <ra> and <tora> will only be displayed if <ra> of the AT^SSCONF command is set to 1.

• If either a SM or a Status Report is not acknowledged, all AT+CNMI parameter in all channels will be set to

zero.

<bm>

(num)(&W)(&V)

<ds>

(num)(&W)(&V)

<bfr>

(num)(&V)

<index>

(num)

1 2 ... 375 376 377 378 379 380 381 382 383 384 385 ... 568 569

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens AC75 Bedienungsanleitung Seite 380

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75