Siemens AC75 Bedienungsanleitung Seite 299
- Seite / 569
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
AC75 AT Command Set
10.14 Examples of how to Configure and Use Internet Service Profiles
s
AC75_ATC_V01.002 Page 299 of 569 10/30/06
Confidential / Released
10.14.3 Configuring Socket Client for Calling a Socket Listener on
Another Host
The example assumes that a connection profile has been created as explained in Section 10.1.1 or Section
10.1.2.
Configure the client's service profile 1 for calling a Socket listener on another host:
10.14.4 Socket Client Sends Data via TCP Connection (Polling Mode)
The example uses service profile 0 configured for Socket service and TCP.
at^siss=1,srvType,socket
Select service type Socket.
OK
at^siss=1,conId,0
Select connection profile 0.
OK
at^siss=1,address,"socktcp://
10.10.0.187:65534"
The service profile of the client contains the IP
address and the TCP port of the remote host.
OK
AT^SISO=0
The host opens service profile 0.
OK
Note: URC ^SISW:0, 1 does not appear! The host
must poll the service state by means of AT^SISI until
the service is in <srvState> "Up".
AT^SISI=0
^SISI: 0,3,0,0,0,0
The service is still in <srvState> "Connecting".
OK
AT^SISI=0
^SISI: 0,4,0,0,0,0
The service is now in <srvState> "Up" and is
ready to accept data.
OK
AT^SISW=0,10
The host requests to write 10 bytes.
^SISW: 0,10,10
Response that 10 bytes can be sent and are unac-
knowledged.
0123456789
OK
AT^SISW=0,10,1
The host requests to write next 10 bytes and enables
the end-of-data flag.
^SISW: 0,0,10
But the service refuses the request, even the end-of-
data flag remains without effect.
OK
AT^SISW=0,10,1
Next try (polling).
^SISW: 0,10,20
Response that the service accepts 10 bytes and this
data and the previously sent data are unacknowl-
edged.
0123456789
OK
AT^SISW=0,0,0
Polling to request unacknowledged data.
^SISW: 0,0,10
There are 10 bytes still unacknowledged.
OK
AT^SISI=0
Polling for <srvState> change ("Closing" ->
"Down").
^SISI: 0,5,0,20,10,10
20 bytes are transfered via serial interface, 10 bytes
are acknowledged by remote peer, 10 bytes are on
the way.
OK
- AT Command Set 1
- Contents 3
- AC75 AT Command Set 10
- List of Tables 12
- List of Figures 13
- 1. Introduction 14
- 1.2 Related documents 15
- 1.3 Document conventions 16
- 1.3.1 Quick reference table 16
- 1.4 AT Command Syntax 18
- 1.4.1 Using Parameters 18
- 1.5 Supported character sets 20
- 1.10 Errors and Messages 31
- 2. Configuration Commands 32
- 2.2.1 AT&V responses 34
- 3. Status Control Commands 80
- 3.2 AT+CIND Indicator control 82
- 3.4.2 SIEMENS L2 cause 94
- Management (SM) 95
- 4.1 AT\Q Flow control 105
- 4.5 ATE Enable command echo 109
- 4.9.1 Autobauding 117
- 5. Security Commands 124
- 5.4 AT+CLCK Facility lock 134
- 5.5 AT^SLCK Facility lock 139
- 5.6 AT+CPWD Change Password 140
- 5.7 AT^SPWD Change Password 144
- 5.8 AT^SCSL Customer SIM Lock 146
- 6. Identification Commands 150
- 7. Call related Commands 156
- 7.2 ATA Answer a call 157
- 7.10 AT+CHUP Hang up call 167
- 7.29 ATP Select pulse dialing 193
- 7.30 ATT Select tone dialing 193
- 8. Network Service Commands 194
- 8.5 AT+CSQ Signal quality 203
- 8.6 AT^SMONC Cell Monitoring 204
- 8.7 AT^SMOND Cell Monitoring 206
- 8.9.1 AT^MONI responses 211
- 8.9.2 Service states 212
- 8.10.1 AT^MONP responses 214
- 8.11 AT^SMONG GPRS Monitor 215
- 8.13 AT^SHOM Display Homezone 219
- 9.5 AT+CCUG Closed User Group 230
- 9.7 AT+CCWA Call Waiting 236
- 10. Internet Service Commands 253
- 10.11.1 Example: Ping 292
- Another Host 299
- 11. GPRS Commands 308
- 12. FAX Commands 352
- 12.4 AT+FRM Receive Data 355
- 12.5 AT+FRS Receive Silence 356
- 12.7 AT+FTM Transmit Data 358
- 13.1 SMS parameters 360
- 14. SIM related Commands 402
- 15.3 Related AT Commands 426
- 16.2 ^SSTN SAT Notification 430
- 16.4 AT^SSTR SAT Response 432
- 17. Phonebook Commands 433
- 17.2 AT+CNUM Read own numbers 434
- 18. Audio Commands 456
- 18.5 AT+CMUT Mute control 459
- 18.6 AT+VTD Tone duration 460
- 19. Hardware Related Commands 481
- 19.2 AT+CALA Set alarm time 482
- 19.3 AT^SAD Antenna Diagnosis 485
- 19.6.1 Deferred shutdown 492
- 19.8.2 Selecting SPI Mode 499
- 19.8.5 Example: Using I²C Bus 504
- 20. GPIO Commands 508
- 21. Java related Commands 521
- 22. Miscellaneous Commands 529
- 23. Appendix 535
Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75
Mobiltelefone Siemens C62 Bedienungsanleitung
(69 Seiten)
(69 Seiten)
Mobiltelefone Siemens SXG75 Bedienungsanleitung
(166 Seiten)
(166 Seiten)
Mobiltelefone Siemens A35 Bedienungsanleitung
(43 Seiten)
(43 Seiten)
Mobiltelefone Siemens M30 Bedienungsanleitung
(31 Seiten)
(31 Seiten)
Mobiltelefone Siemens CXT65 Bedienungsanleitung
(141 Seiten)
(141 Seiten)
Mobiltelefone Siemens S56 Bedienungsanleitung
(152 Seiten)
(152 Seiten)
Mobiltelefone Siemens AX75 Bedienungsanleitung
(28 Seiten)
(28 Seiten)
Mobiltelefone Siemens C30 Bedienungsanleitung
(31 Seiten)
(31 Seiten)
Mobiltelefone Siemens MC60 Bedienungsanleitung
(118 Seiten)
(118 Seiten)
Mobiltelefone Siemens CX70 Bedienungsanleitung
(74 Seiten)
(74 Seiten)
Mobiltelefone Siemens GSM 900 Bedienungsanleitung
(115 Seiten)
(115 Seiten)
Mobiltelefone Siemens A60 Bedienungsanleitung
(62 Seiten)
(62 Seiten)
Mobiltelefone Siemens S40 Bedienungsanleitung
(50 Seiten)
(50 Seiten)
Mobiltelefone Siemens SL75 Bedienungsanleitung
(139 Seiten)
(139 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.769 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern