Siemens ESM Betriebsanleitung PDF herunterladen (Seite 17)

Building Technologies

Page 17 of 50 Last Revised: 4/11/2011

Locking and unlocking the keypad

To lock the BOP-2 keypad press

and simultaneously for 3 seconds or more. To unlock the keypad

press

and simultaneously for 3 seconds or more.

Screen icons

The BOP-2 displays a number of icons at the left-hand side of the display to indicate the actual state of the

Inverter. These icons are explained in the table below.

Function Status Icon Remarks

Command source Hand

When the HAND mode is active the icon is

displayed. When AUTO mode is active, no icon

is displayed.

Inverter status Inverter and motor running

This is a static icon and does not rotate.

Jog Jog function is active

Fault/alarm Fault or alarm pending

Flashing symbol = Fault

Steady symbol = Warning

If a fault is detected, the Inverter will be stopped

and the user is required to take the necessary

corrective actions to clear the fault. An alarm is

a condition that will not stop the Inverter, for

example, over temperature.

6.1.2 Menu structure

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

Keine Kommentare

Siemens ESM Betriebsanleitung Seite 17