Siemens ESM Betriebsanleitung PDF herunterladen (Seite 45)

Building Technologies

Page 45 of 50 Last Revised: 4/11/2011

7.1.2 Active faults and alarms

When the Inverter detects a fault or alarm condition it maintains a list of all the currently active faults and

alarms. For a detailed explanation of the displayed fault and alarm numbers, please refer to the relevant

Parameter List.

To see which faults and alarms are currently active, the following procedure should be performed:

1. Using the

and keys navigate to the Diagnostics screen.

2. Press

to select the Diagnostics menu.

3. Using the

and keys select the FAULTS screen.

4. Press

to display the selected screen.

5. Using the

and keys scroll through the faults and alarm

list.

6. Press

to clear faults.

7. Press

will return the BOP-2 to the ACKN ALL screen.

Note:

If a fault occurs, the dynamic fault screen will be displayed

automatically.

7.1.3 History

The History option within the Diagnostics menu maintains a list of the last 64 faults that have occurred within

the Inverter/motor system. For a detailed explanation of the displayed fault and alarm numbers, please refer

to the relevant Parameter List.

To access the History option, the following procedure should be performed:

1. Using the

and keys navigate to the Diagnostics screen.

2. Press

to select the Diagnostics menu.

3. Using the

and keys select the HISTORY screen.

4. Press

to display the selected screen.

5. Using the

and keys scroll up or down through the list of

recorded faults and alarms.

6. Press to return to the Diagnostic top level menu.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

Keine Kommentare

Siemens ESM Betriebsanleitung Seite 45