Siemens CP 1515 Betriebsanleitung PDF herunterladen (Seite 44)

Configuration Using Web Based Management and the Command Line Interface

Operating Instructions SCALANCE W 744-1PRO

44 C79000-G8976-C185-03

5.1.4 Command Line Interface

Starting the CLI in a Windows Console

Follow the steps outlined below to start the Command Line Interface in a Windows

console:

1. Open a Windows console and type in the command telnet followed by the IP

address of the SCALANCE W744:

C:\>telnet <IP address>

2. Enter your login and password.

As an alternative, you can also enter the command telnet followed by the IP ad-

dress of the SCALANCE W744 in the Start > Execute menu.

Starting the CLI in Web Based Management

Click on the Console entry in the upper menu bar of Web Based Management. A

console opens in which you can log on with your login and password. The IP ad-

dress is adopted by Web Based Management.

Shortcuts for Commands

As an alternative, instead of entering full CLI commands, you can simply enter the

first letter or the first few letters of the command and then press the Tab key. The

Command Line Interface then displays a command starting with the letter or letters

you typed in. If the command displayed is not the command you require, press the

Tab key again to display the next command.

Directory Structure

Before you can enter a command in the Command Line Interface, you must first

open the required menu or submenu. This section lists the commands of each

menu in a separate table. The menu itself is shown above the table on a gray

background. The table lists only the commands themselves.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 103 104

Keine Kommentare

Siemens CP 1515 Betriebsanleitung Seite 44