Siemens CP 1515 Betriebsanleitung PDF herunterladen (Seite 51)

Configuration Using Web Based Management and the Command Line Interface

Operating Instructions SCALANCE W 744-1PRO

C79000-G8976-C185-03

5.2.5 Event Config Menu Command

System Events of the SCALANCE W744

On this page, you specify how the SCALANCE W744 reacts to system events. You

can configure the reaction of the SCALANCE W744

-1PRO to the following events:

● Startup of the SCALANCE W744

● Change in the Ethernet status Link up / Link down.

● Error in authentication.

● Changing the power supply of the SCALANCE W744.

Evaluation of this event is only useful when using a redundant power supply.

● Change in the error status

Reaction to System Events

The following alternatives are possible:

● The SCALANCE W744 sends an E-mail.

● The SCALANCE W744 writes an entry in the log file.

● The SCALANCE W744 indicates an error (the error LED lights up).

By selecting the appropriate check boxes, you specify which events trigger which

reactions on the SCALANCE W744. With the check box in the Functions enabled

row, you enable or disable the sending of E-mails or triggering of SNMP traps.

Syntax of the Command Line Interface

For each of the four possible reactions E-mail, trap, log and fault, either E (En-

abled, setting is enabled) or D (Disabled, setting is disabled) must be entered as

the parameter. If, for example, an E-mail is sent when the SCALANCE W744 re-

starts (first parameter "CW") and an entry is made in the log table but neither a trap

nor an error is generated, the following command must be entered:

setec CW E D E D

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 103 104

Keine Kommentare

Siemens CP 1515 Betriebsanleitung Seite 51