Siemens OSM Bedienungsanleitung PDF herunterladen (Seite 108)

Web-Based Management (WBM)

4-47

Industrial Ethernet OSM/ESM Network Management

C79000-G8976-C137-08

4.11.1 Port Configuration

In the Port Configuration window (Figure 4-28), you can modify the settings for

the OSM/ESM ports.

Figure 4-28 Port Configuration

Follow the steps outlined below to change the settings of a port:

1. Select the number of the required port in the Port list box.

2. The Port Enabled check box enables ( 4 ) or disables data exchange on the

port.

3. The Lock Enabled check box prevents ( 4 ) or allows the passing on of

packets whose source address is not in the FDB table of the OSM/ESM.

4. The FD Flow Control Enabled check box enables ( 4 ) or disables full duplex

flow control for a port. Full duplex flow control is only effective when the port

operates in the full duplex mode.

5. The HD Flow Control Enabled check box enables ( 4 ) or disables half duplex

flow control. Half duplex flow control is only effective when the port is operating

in the half duplex mode.

6. The Autonegotiation Enabled check box enables ( 4 ) or disables

autonegotiation for a port.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 157 158

Keine Kommentare

Siemens OSM Bedienungsanleitung Seite 108