Siemens SISTORE AX16 Bedienungsanleitung PDF herunterladen (Seite 19)

Installation

Siemens Building Technologies

Fire Safety & Security Products 12.2008

NOTE

You cannot mix PAL and NTSC equipment. For example you cannot use a PAL camera and an NTSC

monitor.

7.1 Connecting the video input

Fig. 3 Video input connectors

Connect the coaxial cables from the video sources to the BNC Video In

connectors.

7.2 Connecting the loop-through video

Fig. 4 Video loop-through connectors

If you would like to connect your video source to another device, you can use the

Loop BNC connectors.

NOTE

The Loop BNC connectors are auto terminated. Do not connect a cable to the Loop BNC unless it is

connected to a terminated device because it will cause poor quality video.

7.3 Connecting the monitor

Fig. 5 Video Out connectors

Connect the main monitor to either the Video Out or SVHS Out connector.

NOTE

If your main monitor has an SVHS input, use it because it will give you better quality video display.

Up to four Spot monitors can be connected to the DVR. Connect the spot monitors

to the SPOT 1, SPOT 2, SPOT 3 and SPOT 4 connectors as needed.

Fig. 6 VGA connector

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 125 126

Keine Kommentare

Siemens SISTORE AX16 Bedienungsanleitung Seite 19