Siemens SISTORE AX16 Bedienungsanleitung PDF herunterladen (Seite 48)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

Î The Motion Detection Zone screen displays.

Fig. 51 Motion Detection Zone screen

The Motion Detection Zone screen is laid over the video for the selected camera.

You can set up motion detection zones by selecting or clearing blocks.

NOTE

You can set up motion zones one block at a time in groups of 8 or 16 individual block groups (8- and

16-channel DVR respectively). A block group is positioned within the image area using the Up and

Down arrow buttons, and individual blocks within the block groups are selected or cleared using the

camera buttons.

Press the button to display the menu screen. The menu on the setup screen

has the following functions:

Fig. 52 Motion Detection Zone menu

Select Activates highlighted blocks to detect motion.

Clear Deactivates highlighted blocks so that they will not detect motion.

Reverse Activates inactive highlighted blocks and deactivates active highlighted blocks.

Select All Blocks Activates all blocks to detect motion.

Clear All Blocks Deactivates all blocks so that they will not detect motion.

Reverse All Blocks Activates inactive blocks and deactivates active blocks.

OK Accepts changes and closes Zone setup.

Cancel Exits Zone setup without saving changes.

You can control excessive event logging and remote notification of motions

detected after the motion dwell time by adjusting the motion ignoring dwell

intervals.

Highlight the box beside Motion Ignoring Interval and press the

button.

Î A list of intervals ranging from 1 to 5 seconds or "Never" appears.

Î The DVR will not log and notify motion events occurred during the preset interval

range.

NOTE

The record action for motion events will not be affected by the Motion Ignoring function.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 125 126

Keine Kommentare

Siemens SISTORE AX16 Bedienungsanleitung Seite 48