Siemens SISTORE AX16 Bedienungsanleitung PDF herunterladen (Seite 34)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

NOTE

Descriptions of the Record icons in the Type column are as follows:

: Time-lapse (Time), :Alarm-In, : Motion, : Video Loss, : Text-In

NOTE

Channels that are not defined will use the setting values of the previous schedule item.

NOTE

When multiple events are detected at the same time from a specific channel, the DVR will record

event video with the high setting values if the ips, Quality, Resolution and Dwell values of events are

different from each other. However, the ips will be reset to the supported maximum value when the

ips, Quality, Resolution and Dwell are all set to the highest value. (Advanced Mode Only)

7. Highlight the box under the heading and press the button to delete the

recording settings.

Î You will be asked to confirm that you want to delete the settings.

8. Highlight Default… and press the

button.

Î The Default screen appears.

Fig. 30 Default (Advanced Mode) setup screen

Highlighting boxes under ips and pressing the

button allows you to set the

images per second for Time and Event recording. You can select from 1.00 to

25.00 (30.00 for NTSC) images per second.

Highlighting boxes under Quality and pressing the

button allows you to set

the recorded image quality for Time and Event recording. You can select

from: Very High, High, Standard and Low.

Highlighting boxes under Dwell and pressing the

button allows you to set

the length of time you would like to record for the associated event.

(Advanced Mode Only)

Î You can save your changes by highlighting OK and pressing the button.

Î Selecting Cancel exits the screen without saving the changes.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 125 126

Keine Kommentare

Siemens SISTORE AX16 Bedienungsanleitung Seite 34