Siemens SISTORE AX16 Bedienungsanleitung PDF herunterladen (Seite 38)

Configuration

Siemens Building Technologies

Fire Safety & Security Products 12.2008

7. The DVR supports two-way audio communications between a local system

and a PC running RAS.

Î Highlighting the box beside Remote Audio Channel and pressing the

button allows you to select the audio channel that sends audio to the remote

site. Selecting Select From RAS will send audio of the channel selected from

RAS.

NOTE

Depending on network conditions, audio might be interrupted or out of synchronization during

transmission.

8. Highlight the Mail tab, and the Mail screen displays.

Î The DVR can be set up to send an email when an event occurs.

Fig. 35 Mail setup screen

Mail

1. Highlight Enable and press the

button to toggle between On and Off.

Î You will only be able to change the settings if Mail is enabled.

2. Highlight the box beside SMTP Server and press the

button.

Î A virtual keyboard appears that you can use to enter the IP address or

domain name of the SMTP server.

NOTE

You will need to get the IP Address or domain name of the SMTP Server from your network

administrator.

NOTE

You can use the domain name instead of IP address if you already set up the DNS Server when

setting up the LAN.

3. Highlight the box beside Port and press the button.

4. Use the arrow buttons to enter the SMTP Server port number obtained from

your system administrator. The default port number is 25.

5. Highlight Use SSL/TLS and press the

button to toggle between On and

Off.

Î When it is On, the DVR can send an email via an SMTP server requiring SSL

(Secure Sockets Layer) authentication.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 125 126

Keine Kommentare

Siemens SISTORE AX16 Bedienungsanleitung Seite 38