Siemens AC75 Bedienungsanleitung PDF herunterladen (Seite 269)

AC75 AT Command Set

10.3 AT^SISS

AC75_ATC_V01.002 Page 269 of 569 10/30/06

Confidential / Released

smAuth SMTP authentication control flag (numeric).

If disabled (<srvParmValue> "0" by default), AC75 performs action without

SMTP authentication.

If enabled (<srvParmValue> "1") authentication procedure with the SMTP

server will be performed by means of supported authentication methods, using

values of "user" and "passwd" parameters. If AC75 and SMTP server are not

able to negotiate an authentication mechanism supported by both parties, the

AC75 continues action without authentication.

AC75 supports SMTP authentication.

pCmd POP3 user command to be executed by the POP3 service (numeric).

For supported values of <srvParmValue> refer to <srvParmValue-pCmd>.

pNumber Optional message number argument used by the POP3 commands List ("2"),

Retrieve ("3") and Delete ("4"). For POP3 commands see <srvParmTag>

value "pCmd".

Length: 0 ... 2

-1

If no specific value is set in the service profile, the value "0" is assumed by

default, i.e. "pNumber" is disabled.

pLength Maximum message length (string, optional)

Length: 0 ... 2

-1

"pLength" can be used to specify the length of the message(s) to be retrieved

from or deleted on the POP3 server. If no specific value is set in the service

profile, the default value "0" is assumed, which means that there is no limit on

the message size.

A warning will be issued inthe following cases:

• If "pNumber" > 0 and a specific message to be retrieved from / deleted on

the server is longer than "pLength".

• If "pNumber" = 0 and all messages to be retrieved from / deleted on the

server are longer than "pLength".

No warning will be issued in the following cases:

• If there are no messages at all on the server.

• If the server has message(s) below and above the "pLength" specified. In

this case, the message(s) within the range of "pLength" can be successfully

retrieved or deleted, but the message(s) above "pLength" remain on the

server without any further notification given to the user.

• Therefore, after retrieving / deleting messages, it is recommended to check

the message status on the server. This can be done by adding a further

POP3 service profile using the POP3 user command List ("2").

pDelFlag Flag to be used with the POP3 user command Retrieve ("3"). Specifies whether

or not to delete retrieved emails on the server (optional).

For supported values of <srvParmValue> refer to <srvParmValue-

pDelFlag>.

tcpMR Parameter can be used to overwrite the global AT^SCFG parameter "Tcp/

MaxRetransmissions" <tcpMr> for a specific Internet Service connection pro-

file. If the parameter is not specified the value specified with AT^SCFG will be

used.

Supported values <srvParmValue> for this parameter are the same as

described for <tcpMr>.

Setting is not relevant for Internet Service "Socket" whit type "UDP".

tcpOT Parameter can be used to overwrite the global AT^SCFG parameter "Tcp/Over-

allTimeout" <tcpOt> for a specific Internet Service connection profile. If the

parameter is not specified the value specified with AT^SCFG will be used.

Supported values <srvParmValue> for this parameter are the same as

described for <tcpOt>.

Setting is not relevant for Internet Service "Socket" whit type "UDP".

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 568 569

Siemens AC75 Bedienungsanleitung Seite 269

Kommentare zu diesen Handbüchern

Siemens AC75 Bedienungsanleitung Seite 269

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75