Siemens AC75 Bedienungsanleitung PDF herunterladen (Seite 283)

100

101

AC75 AT Command Set

10.8 AT^SISW

AC75_ATC_V01.002 Page 283 of 569 10/30/06

Confidential / Released

10.8 AT^SISW Internet Service Write Data

The AT^SISW command triggers a write operation (upload) and queries the amount of data already sent, but not

acknowledged at the TCP layer. The write operation may be run in binary mode, or in interactive text mode.

The AT^SISW write command may return the following errors:

• "+CME ERROR: operation failed" if there is a problem on application, socket, PPP or GPRS/GSM level. The

AT^SISE command and the "^SIS" URC offer additional error information.

• "+CME ERROR: operation temporary not allowed" e.g. if the service has not network resources allocated.

• "+CME ERROR: operation not allowed" e.g. if the service is not configured.

Syntax

Unsolicited Result Code

^SISW: <srvProfileId>, <urcCauseId>

Data availability status of the Internet service configured with AT^SISS has changed. The URC is issued when

the service is ready to accept new user data.

The URC is disabled in polling mode. See AT^SCFG, parameter "Tcp/WithURCs", <tcpWithUrc>.

Parameter Description

<srvProfileId> 0 ... 9 specified with AT^SISS.

0...1500

Specifies the number of bytes to be sent with AT^SISW or, if set to 0, requests the amount of data already sent

with AT^SISW but not yet acknowledged:

• Parameter <reqWriteLength> may be 1...1500 bytes to specify the amount of data to be sent with

AT^SISW.

• If parameter <reqWriteLength> equals 0, AT^SISW does not expect any data, but a normal query is per-

fomed. This allows the application to explictly request, in particular at the end of an upload job, the amount of

unacknowledged data at the TCP layer indicated by <unackData>.

• In interactive text mode, <reqWriteLength> must be set to any value greater than 0 (but not necessarily

the precise number of bytes). If set to 0 in interactive text mode, <reqWriteLength> would be interpreted

as query for unacknowledged data and, thus, prevent data transfer.

Test Command

AT^SISW=?

Response(s)

Write Command

AT^SISW=<srvProfileId>, <reqWriteLength>[, <eodFlag>[, <mode>[, <optServParam>]]]

Response(s)

^SISW: <srvProfileId>, <cnfWriteLength>, <unackData>

Number of data bytes as specified by <cnfWriteLength>.

ERROR

+CME ERROR: <err>

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

± + + + + + + - - +

(num)

(num)

1 2 ... 278 279 280 281 282 283 284 285 286 287 288 ... 568 569

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens AC75 Bedienungsanleitung Seite 283

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75