Siemens AC75 Bedienungsanleitung PDF herunterladen (Seite 519)

100

101

AC75 AT Command Set

20.9 AT^SSCNT

AC75_ATC_V01.002 Page 519 of 569 10/30/06

Confidential / Released

20.9 AT^SSCNT Start and Stop Pulse Counter

The AT^SSCNT write command serves to read, start, restart and stop the pulse counter.

Syntax

Unsolicited Result Code

^SSCNT: <pulse>

The URC applies only to the Start-Stop mode set with AT^SCCNT, parameter <mode>=0. It is delivered once the

pulse counter result was requested with <action>=2 or the pulse counter was stopped with <action>=3. The

URC indicates the number of pulses counted.

Parameter Description

This parameter can only be used after configuring the pulse counter with AT^SCCNT. The <action> types 0, 1

and 2 apply only to the Start-Stop counter mode set with AT^SCCNT.

0 Reset and start pulse counter from 0.

1 Restart pulse counter and continue counting from the <pulse> value of the

last run.

2 Read out current <pulse> value.

Test Command

AT^SSCNT=?

Response(s)

^SSCNT:(list of supported <action>s)

Read Command

AT^SSCNT?

Response(s)

^SSCNT: <action>

If an error occurs:

ERROR

+CME ERROR: <err>

Write Command

AT^SSCNT=<action>

Response(s)

If <action>=0 or 1:

If <action>=2 or 3:

"^SSCNT" URC with parameter <pulse>

If an error occurs:

ERROR

+CME ERROR: <err>

Reference(s) PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

SIEMENS - + + + + + + - + -

(num)

1 2 ... 514 515 516 517 518 519 520 521 522 523 524 ... 568 569

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens AC75 Bedienungsanleitung Seite 519

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75