Siemens AC75 Bedienungsanleitung Seite 64
- Seite / 569
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
AC75 AT Command Set
2.14 AT^SCFG
s
AC75_ATC_V01.002 Page 64 of 569 10/30/06
Confidential / Released
AutoExec AT command String
This parameter specifies the AT command(s) to be launched automatically. Each AT command is executed in
the same way as if it were entered online, this means that command concatenation is possible if supported by
the given commands. If serial multiplex mode is activated (AT+CMUX) the first logical channel is used, i.e. CSD
calls (data or fax) could be set up. If the AC75 is busy on the serial channel command execution will be delayed
until ongoing action is finished.
The first two characters of the automatically launched AT command shall be "at".
Please refer to examples below.
Value will be saved while switching off the AC75 via AT commands (e.g. AT+CFUN or AT^SMSO) and restored
on next power up.
AutoExec Command Period
Parameter specifies the period after which <AutoExecATC> will be executed. Format is "hhh:mm:ss", where
characters indicate hours, minutes and seconds. This parameter applies to <AutoExecType>=1 only.
Value will be saved while switching off the AC75 via AT commands (e.g. AT+CFUN or AT^SMSO) and restored
on next power up.
When using this feature with running java applications, please consider the minimum time for the execution of
AT+CFUN or AT^SMSO is 15 seconds.
000:00:05...240:00:00
AutoExec Command Period Left
This parameter shows the amount of time left until <AutoExecATC> will be executed. Format is "hhh:mm:ss",
where characters indicate hours, minutes and seconds. This parameter applies to <AutoExecType>=1 only.
Due to the internal activity and network signaling an execution delay of several seconds may occur for the overall
procedure.
000:00:00...240:00:00
AutoExec Command Status
This parameter is part of the Autoexec URC which is presented when a scheduled Autoexec activity is being
performed.
“1“ The value 1 indicates that the Autoexec activity specified with <AutoExec-
ATC> is currently executed.
Bit Mask
hex
Mask
dec
Control
D
0
D
1
0x00
0x01
0x02
0x03
0
1
2
3
00: Ignore ongoing calls
01: Wait until all calls have ended
10: Dismiss any ongoing call
11: RFU
D
2
0x04 4 0: One shot action
1: Periodic action (for "AutoExec/Period" only)
D
3
0x08 8 RFU
D
4
0x10 16 RFU
D
5
0x20 32 RFU
D
6
0x40 64 RFU
D
7
0x80 128 RFU
<AutoExecATC>
(str)(+CSCS)
<AutoExecPeriod>
(str)(+CSCS)
<AutoExecPeriodTimeLeft>
(str)(+CSCS)
<AutoExecState>
(str)(+CSCS)
- AT Command Set 1
- Contents 3
- AC75 AT Command Set 10
- List of Tables 12
- List of Figures 13
- 1. Introduction 14
- 1.2 Related documents 15
- 1.3 Document conventions 16
- 1.3.1 Quick reference table 16
- 1.4 AT Command Syntax 18
- 1.4.1 Using Parameters 18
- 1.5 Supported character sets 20
- 1.10 Errors and Messages 31
- 2. Configuration Commands 32
- 2.2.1 AT&V responses 34
- 3. Status Control Commands 80
- 3.2 AT+CIND Indicator control 82
- 3.4.2 SIEMENS L2 cause 94
- Management (SM) 95
- 4.1 AT\Q Flow control 105
- 4.5 ATE Enable command echo 109
- 4.9.1 Autobauding 117
- 5. Security Commands 124
- 5.4 AT+CLCK Facility lock 134
- 5.5 AT^SLCK Facility lock 139
- 5.6 AT+CPWD Change Password 140
- 5.7 AT^SPWD Change Password 144
- 5.8 AT^SCSL Customer SIM Lock 146
- 6. Identification Commands 150
- 7. Call related Commands 156
- 7.2 ATA Answer a call 157
- 7.10 AT+CHUP Hang up call 167
- 7.29 ATP Select pulse dialing 193
- 7.30 ATT Select tone dialing 193
- 8. Network Service Commands 194
- 8.5 AT+CSQ Signal quality 203
- 8.6 AT^SMONC Cell Monitoring 204
- 8.7 AT^SMOND Cell Monitoring 206
- 8.9.1 AT^MONI responses 211
- 8.9.2 Service states 212
- 8.10.1 AT^MONP responses 214
- 8.11 AT^SMONG GPRS Monitor 215
- 8.13 AT^SHOM Display Homezone 219
- 9.5 AT+CCUG Closed User Group 230
- 9.7 AT+CCWA Call Waiting 236
- 10. Internet Service Commands 253
- 10.11.1 Example: Ping 292
- Another Host 299
- 11. GPRS Commands 308
- 12. FAX Commands 352
- 12.4 AT+FRM Receive Data 355
- 12.5 AT+FRS Receive Silence 356
- 12.7 AT+FTM Transmit Data 358
- 13.1 SMS parameters 360
- 14. SIM related Commands 402
- 15.3 Related AT Commands 426
- 16.2 ^SSTN SAT Notification 430
- 16.4 AT^SSTR SAT Response 432
- 17. Phonebook Commands 433
- 17.2 AT+CNUM Read own numbers 434
- 18. Audio Commands 456
- 18.5 AT+CMUT Mute control 459
- 18.6 AT+VTD Tone duration 460
- 19. Hardware Related Commands 481
- 19.2 AT+CALA Set alarm time 482
- 19.3 AT^SAD Antenna Diagnosis 485
- 19.6.1 Deferred shutdown 492
- 19.8.2 Selecting SPI Mode 499
- 19.8.5 Example: Using I²C Bus 504
- 20. GPIO Commands 508
- 21. Java related Commands 521
- 22. Miscellaneous Commands 529
- 23. Appendix 535
Verwandte Produkte und Handbücher für Mobiltelefone Siemens AC75
Mobiltelefone Siemens C62 Bedienungsanleitung
(69 Seiten)
(69 Seiten)
Mobiltelefone Siemens SXG75 Bedienungsanleitung
(166 Seiten)
(166 Seiten)
Mobiltelefone Siemens A35 Bedienungsanleitung
(43 Seiten)
(43 Seiten)
Mobiltelefone Siemens M30 Bedienungsanleitung
(31 Seiten)
(31 Seiten)
Mobiltelefone Siemens CXT65 Bedienungsanleitung
(141 Seiten)
(141 Seiten)
Mobiltelefone Siemens S56 Bedienungsanleitung
(152 Seiten)
(152 Seiten)
Mobiltelefone Siemens AX75 Bedienungsanleitung
(28 Seiten)
(28 Seiten)
Mobiltelefone Siemens C30 Bedienungsanleitung
(31 Seiten)
(31 Seiten)
Mobiltelefone Siemens MC60 Bedienungsanleitung
(118 Seiten)
(118 Seiten)
Mobiltelefone Siemens CX70 Bedienungsanleitung
(74 Seiten)
(74 Seiten)
Mobiltelefone Siemens GSM 900 Bedienungsanleitung
(115 Seiten)
(115 Seiten)
Mobiltelefone Siemens A60 Bedienungsanleitung
(62 Seiten)
(62 Seiten)
Mobiltelefone Siemens S40 Bedienungsanleitung
(50 Seiten)
(50 Seiten)
Mobiltelefone Siemens SL75 Bedienungsanleitung
(139 Seiten)
(139 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.381 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern