Siemens ET8 Series Bedienungsanleitung PDF herunterladen (Seite 14)

G3 Electronics

00497GB-2009/R01

X024 - 14

www.asconumatics.eu

PROFINET

PROFINET is the innovative open standard for

Industrial Ethernet, development by Siemens and

the Profibus User Organization (PNO). PROFINET

complies to IEC 61158 and IEC 61784 standards.

PROFINET products are certified by the PNO user

organization, guaranteeing worldwide compatibility.

Numatics’ G3 PROFINET IO (PROFINET RT) nodes

have an integrated graphic display and are capable

of addressing combinations of up to 544 Inputs /

Outputs.

PROFINET is based on Ethernet and uses TCP/

IP and IT standards and complements them with

specific protocols and mechanisms to achieve a good

Real Time performance.

More information regarding PROFINET can be

obtained from the following WEB site:

www.profinet.com

Technical Data

ELECTRICAL DATA VOLTAGE CURRENT

Node Power at Max. Brightness 24 VDC +/- 10%

Valves & Discrete I/O 24 VDC +/- 10% 8 A maximum

Power Connector Single key 5 pin 7/8” MINI type (male)

Communication Connector Two D-coded 4 pin M12 type (female)

LED's

Module Status, Network Status

and Activity/Link

OPERATING DATA

Temperature Range (ambient) -23º to +50º C

Humidity 95% relative humidity, non-condensing

Vibration / Shock IEC 60068-2-27, IEC60068-2-6

Moisture Protection IP65, IP67 (with appropriate assembly and termination)

CONFIGURATION DATA

Graphic Display Display used for setting IP Address, Subnet Mask, Fault / Idle Actions, and all other system settings.

MCM (Manual Conﬁ guration Module) Optional module containing DIP switches for setting node address.

ARM (Auto Recovery Module) Optional module that contains automatic recovery of system setting in the event of total or partial system failure.

Maximum Valve-Solenoid Outputs 32

Maximum Addressable I/O Points Various combinations of 544 inputs / outputs (1200 bits)

NETWORK DATA

Supported Baud Rates 10 Mbit / 100 Mbit

Bus Connector Two D-coded 4 pin M12 type (2-Female)

Diagnostics Power, short, open load conditions and module health and conﬁ guration are monitored

Special Features Integrated web server, Integrated 2 port switch and fail-safe device settings

WEIGHT

PROFINET

Communication Module

Consult Factory

DESCRIPTION

REPLACEMENT

PART NUMBER

PROFINET

communications

module (node)

240-240

PROFINET

COMM

FEMALE

Pin 1 = TD+

Pin 2 = RD+

Pin 3 = TD-

Pin 4 = RD-

POWER

MALE

Pin 1 = 0 VDC (valves & outputs)

Pin 2 = 0 VDC (node & inputs)

Pin 3 = Earth Ground

Pin 4 = +24 VDC (node & inputs)

Pin 5 = +24VDC (valves & outputs)

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens ET8 Series Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens ET8 Series