Siemens ET8 Series Bedienungsanleitung PDF herunterladen (Seite 17)

G3 Electronics

00497GB-2009/R01

X024 - 17

www.asconumatics.eu

CANopen

bus connection

The front panel of the communication module for CANopen

is equipped with:

- a 4 pin male 7/8” socket for power supply

- a 5 pin male 7/8” socket for the bus cable

The bus can be connected in the two following ways:

• directly to the module with a T-connector,

•

with a straight connector, cable (max. length: 3 m) and a DeviceNet distributor box.

The modules on either side of the system must be provided with terminating resistors (L1 or L2).

24V DC

power supply

BUS

Accessories for CANopen

The modules on either side of the system must be provided with terminating resistors

(K) Cable to be ordered separately.

Accessory Description Order Code

G 5 pin straight 7/8-16 UN female connector 88161930

5 pin straight 7/8-16 UN male connector 88161931

T-connector 7/8-16 UN, 5 male / female / female pins 88161932

Terminating resistor female plug 120 ohms 88161933

Terminating resistor male plug 120 ohms 88161934

4 pin straight female cable connector 7/8”

230-1003

4 pin elbow female cable connector 7/8”

230-1001

4 pin elbow female cable connector 7/8” with 9,15 m cable

230-950

1 = black 2= blue

3 = brown 4 = white

L1L2

■ Wiring with T-connector ■ Connection with distributor box (X)

3m max.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Keine Kommentare

Siemens ET8 Series Bedienungsanleitung Seite 17