Siemens DTU3005-B Betreibershandbuch PDF herunterladen (Seite 21)

4 Creating Project Files—PLC to Devices

Siemens Energy & Automation, Inc. 17

4.6 Device List Setup

The Device List menu item enables you to indicate which

registers on the PLC will receive data from the devices. In

this screen, you will enter the device type and address for

each Siemens device connected to port 2. You will also indi-

cate to which registers on the PLC you want the DTU3005

to write device data.

Select Device List from the Edit menu to display the

device list screen:

This screen is divided into two parts:

• On the left side of the screen is a list of the devices con-

nected to port 2 (the list is initially empty). Up to 32

devices can be attached; however, only 17 of the

devices are visible on the screen at one time. To see all

the devices, click on the scroll bar with the mouse, or

use the Up and Down Arrow and Page Up and Page

Down keys.

• The right side of the screen is used to configure the

data register information for the selected device, as

shown in the example screen on the next page. You

can add or delete devices, or change device configura-

tion by highlighting the Device Type on the left side of

the screen, then using the fields and buttons on the

right side of the screen.

Adding a Device

To add a device to the device list:

1. Highlight the first line where the Device Type and

Address fields are blank—this should be the first avail-

able device number No field.

2. Press Enter or Tab to add a device. The cursor will

move to the Device Type field on the right side of the

screen. Press Enter, and the Device Types list dis-

plays:

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 140 141

Keine Kommentare

Siemens DTU3005-B Betreibershandbuch Seite 21