7 Transferring Project Files
Siemens Energy & Automation, Inc. 51
7.2 Uploading Projects
Select Upload project from DTU3005 from the Transfer
menu, and the confirmation screen shown above
appears. Select Ok and the DTU3005 Editor software
transfers the project from the DTU3005 unit to your
computer.
The computer will upload the project file under the
name “NONAME.” You must save this uploaded
project file using the Save As command from the
Project menu and enter your own file name.
7.3 Verifying Projects
Select Verify from the Transfer menu, and the confir-
mation screen shown above appears. Select Ok and
the DTU3005 Editor software reads the project stored
on the DTU3005 unit and compares it with the cur-
rently displayed project.
After completing the verification process, if the project
files are the same, a message will appear stating
“Data Verified OK”. If the files are different, a message
will be displayed stating which part of the project files
are different.
7.4 Checking the DTU3005
Application
Select Check Application in DTU3005 from the Trans-
fer menu, and the confirmation screen shown above
appears. Select Ok and the DTU3005 Editor software
reads the project from the DTU3005 unit and reports
the type of project and the firmware version.
Kommentare zu diesen Handbüchern