Siemens ET 757 E Series Betriebsanleitung PDF herunterladen (Seite 28)

Description

2.2 Components for assembling a frequency converter

ET 200pro FC

28 Operating Instructions, 11/2007, A5E01100763B AA

Table 2-3 Components of the fail-safe frequency converter with F-Switch

Illustration Components Function

1 Rack, wide The ET 200pro bus modules, onto which the electronic modules are

screwed, must be mounted on the rack.

Lengths: 0.5 m, 1 m

2 Interface module for

PROFINET DP, with bus

module

The interface module interconnects the ET 200pro with the DP master and

prepares the data for the electronic modules.

The unit is delivered with the terminating module, and the interface module

is already mounted on the bus module.

• The bus module is the mechanical and electrical connection element

between the various ET 200pro modules.

• The terminating module terminates the ET 200pro.

The following interface modules are available for PROFIBUS DP:

• IM154-1 DP

• IM154-2 DP HF

3 Connection modules for

interface modules

The connection modules are mounted on the interface modules. They are

used to connect PROFIBUS DP, the electronics/encoder supply and the

load voltage supply.

Available connection modules:

• Direct connection:

– CM IM DP Direct

• ECOFAST:

– CM IM DP ECOFAST Cu

– CM IM DP M12, 7/8"

Not

illustrated

Interface module for

PROFINET IO, with bus

module

The interface module interconnects the ET 200pro with the IO controller and

prepares the data for the electronic modules.

The interface module and connection module are shipped as a compact

unit. The terminating module is included. The interface module is mounted

on the bus module.

Interface module available for PROFINET IO:

• IM154-4 PN HF

4 Fail-safe I/O module, with bus

module

F-Switch

The F-Switch is used in conjunction with the frequency converter only for

the purpose of switching control signals from the higher-level controller

through PROFIsafe onto the internal switch-off signals F0 and F1 on the

ET 200pro backplane bus.

5 Frequency converter with bus

module

The frequency converter is connected to the higher-level controller by way

of the bus module and interface module. Power and motor are connected

using prefabricated cables

6 Terminating module The ET 200pro bus is terminated with the terminating module

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 189 190

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens ET 757 E Series Betriebsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kochfelder Siemens ET 757 E Series