Siemens ET8 Series Betriebsanleitung PDF herunterladen (Seite 13)

Additional Information CLV61x Dual Port (PROFINET IO)

4.2 Adding ID sensors in HW Config

To add the ID sensors to be connected in the system, select the required device, e.g., "CLV61x 2port",

and drag-and-drop to the PROFINET line.

You can select the Device name for identifying the device in PROFINET by double clicking on the module.

If you activate "Assign IP address via IO controller", the PLC automatically assigns the IP address when

a device with the corresponding PROFINET device name has been found.

Make sure that no duplicate IP addresses are used. If two devices have the same IP address, change

one address before continuing. Use the SOPAS-ET Auto IP Scan, for example, to change the IP address of

the ID sensor, or change the IP address of the CLV61x Dual Port via the PLC HW Config.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 51 52

Keine Kommentare

Siemens ET8 Series Betriebsanleitung Seite 13