Siemens ET8 Series Betriebsanleitung PDF herunterladen (Seite 35)

Additional Information CLV61x Dual Port (PROFINET IO)

GSDML configuration:

Note that GSDML configuration is optional and is sent to the CLV61x Dual Port every time PROFINET starts.

This overwrites the existing parameters in the CLV61x Dual Port.

Example:

• GSDML configuration must always begin with "01_Start_Remote Config":

 For this, only Code 128 was activated and triggering via fieldbus bit selected.

• Secondly, reading configuration by the "11 Reading Config" module was selected:

For example, the scanning frequency can be adjusted here.

• As this is a simple application, the Handshake mode is switched off.

Note:

No Handshake must be carried out on the PLC and simple operation with a short data string can

take place.

If the SICK function module is to be used, the Handshake must be switched on.

• Additional configuration modules can be selected according to the application.

The process must always be completed with the "99_End_Remote Config" module.

• The HW Config must finally be saved and transferred to the PLC.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Keine Kommentare

Siemens ET8 Series Betriebsanleitung Seite 35