Installation instructions and notes on usage
D.4 Assembly instructions for SIMATIC NET PROFIBUS plastic fiber optics with BFOC connectors
PROFIBUS Network Manual
System Manual, Edition 04/2009, C79000-G8976-C124-03
309
5. Press the handles of the crimping pliers firmly together.
The connector body is joined to the core and the
crimping sleeve.
Note: The pliers can only be opened again when the
required pressure has been reached.
6. Open the crimping pliers and remove the core.
7. Push the anti-kink sleeve onto the connector body
as far as the limit stop.
8. Shorten the end of the fiber extending out of
the connector face to a length of 0.5 mm with scissors.
9. Repeat the same steps with the second core.
Notice: Do not insert the connector into the device socket
yet, the excess fiber extending out of the connector face
could damage the send and receive elements.
Kommentare zu diesen Handbüchern