Siemens DTU3005-B Betreibershandbuch PDF herunterladen (Seite 36)

5 Transferring Project Files

32 Siemens Energy & Automation, Inc.

5.1 Downloading Projects

Select Download project to DTU3005P from the

Trans fer menu. The Transfer Confirmation screen is

displayed (see Figure 5.4).

Select Ok and the DTU3005P Editor program trans-

fers the open project to the DTU3005P unit.

5.2 Uploading Projects

Select Upload project from DTU3005P from the

Trans fer menu, and the confirmation screen shown

below is displayed. Select Ok and the DTU3005P

Editor program transfers the project from the

DTU3005P unit to your computer.

The computer will upload the project file under the

name “NONAME.” You must save this uploaded

project file using the Save As command from the

Project menu and enter your own file name.

Figure 5.4 Transfer Confirmation Screen

5.3 Verifying Projects

Select Verify from the Tr a n sfe r menu, and the con-

firmation screen shown above is displayed. Select

Ok and the DTU3005P Editor program reads the

project stored on the DTU3005P unit and compares

it with the currently displayed project.

After completing the verification process, if the

project files are the same, a message will display

stating “Data Verified OK”. If the files are different, a

message will display stating which parts of the

project files are different.

5.4 Checking the DTU3005P

Application

Select Check Application in DTU3005P from the

Tr a ns f e r menu, and the confirmation screen shown

above is displayed. Select Ok and the DTU3005P

Editor program reads the project from the

DTU3005P unit and reports the type of project and

the firmware version.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 119 120

Keine Kommentare

Siemens DTU3005-B Betreibershandbuch Seite 36