Siemens SINUMERIK 802D sl Wartungshandbuch PDF herunterladen (Seite 52)

Manual machining

5.3 Manual machining with machining types

Manual Machine Plus Turning

52 Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

5.3.3.1 Radius turning type A

For the radius turning type A, the radius to be machined is specified by the end point, the

radius and the machining direction.

Figure 5-15 Radius turning type A

Parameter

Parameter Description

Xf This input value describes the position of the circle end point in the X axis. The input

value is evaluated as absolute position (in the diameter).

Zf This input value describes the position of the circle end point in the Z axis. The input

value is evaluated as absolute position.

R This input value describes the radius to be traversed.

Counterclockwise/Clockwise This toggle field selects whether a circle must be traversed in the clockwise or

counterclockwise direction.

5.3.3.2 Radius turning type B

For the radius turning type B, the radius to be machined is specified by the center, the

radius, the opening angle and the machining direction.

Figure 5-16 Radius turning type B

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 129 130

Keine Kommentare

Siemens SINUMERIK 802D sl Wartungshandbuch Seite 52