Siemens SINUMERIK 802D sl Wartungshandbuch PDF herunterladen (Seite 63)

Manual machining

5.4 Manual machining using cycles (functions)

Manual Machine Plus Turning

Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

DANGER

Notice: If "Time feed" is selected in the “Machining technology data” screen, in order for the

pitch to be calculated correctly, the spindle override weighting must be set to "100%".

Otherwise, the tapping tool or workpiece may be damaged!!

->Prior to NC start, check that the spindle override weighting is set to 100%!

Operating sequences

You can access the drilling cycle overview by pressing the softkey "Drilling" in the basic

screen for "Manual Machine Plus".

Figure 5-24 Drilling cycle overview - "Tapping" selected

'ULOOLQJ

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 129 130

Keine Kommentare

Siemens SINUMERIK 802D sl Wartungshandbuch Seite 63