Siemens SINUMERIK 802D sl Wartungshandbuch Seite 73
- Seite / 130
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Manual machining
5.4 Manual machining using cycles (functions)
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
73
Figure 5-33 Face groove
Parameter
Parameter Description
Reference z0 Starting position for the groove. The edge of the groove facing the chuck is always
specified here. The value to be entered is the absolute position in the longitudinal axis
(Z axis).
Groove width l1 This value is the groove width, which together with the value for "Reference z0"
specifies the absolute position of the edge of the groove on the side of the groove
facing away from the spindle. If the groove width setting is the same as the tool width,
and "0" is assigned to the parameters "Edge F1" and "Edge F2" (selection between
"Chamfer CHF" and "Radius RND), the tapping function is activated.
Diameter d Starting diameter for the groove. The value to be entered is the absolute position in the
transverse axis (X axis).
Groove depth t This value is the groove depth which together with the value for "Diameter d" specifies
the absolute position of the base of the groove.
Chamfer/radius F1 Depending on the option selected, this value forms either an input radius (display
"Radius RND") or an input chamfer (display "Chamfer CHF") on the first side of the
groove. You can toggle between RND / CHF using the toggle key. An input value of 0.0
switches this function off.
Chamfer/radius F2 Depending on the option selected, this value forms either a radius (display "Radius
RND") or a chamfer (display "Chamfer CHF") on the first side of the groove as the
transition to the base of the groove. You can toggle between RND / CHF using the
toggle key. An input value of 0.0 switches this function off.
Chamfer/radius F3 Depending on the option selected, this value forms either a radius (display "Radius
RND") or a chamfer (display "Chamfer CHF") on the second side of the groove as the
transition to the base of the groove. You can toggle between RND / CHF using the
toggle key. An input value of 0.0 switches this function off.
Chamfer/radius F4 Depending on the option selected, this value forms either an input radius (display
"Radius RND") or an input chamfer (display "Chamfer CHF") on the second side of the
groove. You can toggle between RND / CHF using the toggle key. An input value of 0.0
switches this function off.
Max. infeed depth m1 Enter the maximum infeed depth for roughing during grooving. The cycle’s internal
infeed calculation ensures that this input value is not exceeded during machining.
- SINUMERIK 1
- SINUMERIK 802D sl 1
- Manual Machine Plus Turning 1
- Legal information 2
- Foreword 3
- Technical support 4
- SINUMERIK Internet address 4
- Foreword 5
- Table of contents 7
- Reference 10
- Description 11
- Hot keys 12
- Description 14
- Software interface 15
- 0DQXDOO\ 18
- &1& 18
- Requirement 19
- Operating sequence 20
- 3.2 Reference point approach 22
- Setting-up 23
- Setting-up 25
- 4.1 Measuring tools 25
- 4.2 Limit stops 26
- Parameter 27
- OLPLWVWRS 28
- Example: 29
- 4.2 Limit stops 30
- Additional information 31
- 'HOHWH 32
- Machine Plus" 34
- 5.2.1 Toggling the display 38
- 5.2.6 Tool change 41
- 0DFKLQHG 47
- 5.3.3 Manual radius turning 49
- 'ULOOLQJ 55
- D[LVSRV 55
- 5.4.2 General parameters 58
- 5.4.4 Manual thread tapping 62
- Tapping operation 64
- Groove cycle - single 67
- Multiple grooves 69
- Parting 70
- 5.4.5.4 Multiple tapping 70
- Multiple tapping 71
- 5.4.5.5 Extended grooving 71
- ([WHQGHG 72
- Extended grooving 74
- 5.4.6 Manual thread cutting 76
- 5.4.6.1 Thread cutting 77
- UHFXWWLQJ 80
- Execute thread recut 82
- 5.4.7 Roughing cycles 84
- 5RXJKLQJ 85
- F\FOH& 91
- F\FOH' 94
- &XWWLQJ 99
- Input fields 100
- Functionality 101
- Operating sequences 101
- ([WHUQDO 102
- FRQWRXUV 102
- &\FOH 102
- RYHUYLHZ 102
- Manual machining 103
- References 104
- Rough cutting 105
- Finish cutting 105
- See also 105
- Manual machining 106
- Screen handling functions 108
- Softkeys 108
- 7HDFK,Q 110
- 6.2 Teach In 114
- 6.2 Teach In 115
- 6.3 Simulate machining 117
- &RQWRXU 118
- VLPXODWLRQ 118
- Messages 123
- 7.1 Messages 124
- Appendix 125
- Appendix 127
Verwandte Produkte und Handbücher für Sicherheitszugriffskontrollsysteme Siemens SINUMERIK 802D sl
(116 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.821 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern