Siemens SINUMERIK 802D sl Wartungshandbuch PDF herunterladen (Seite 66)

Manual machining

5.4 Manual machining using cycles (functions)

Manual Machine Plus Turning

66 Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0

Figure 5-27 Outer groove

Figure 5-28 Inner groove

Parameter

Parameter Description

Reference z0 Starting position for the groove. The edge of the groove facing the chuck is always

specified here. The value to be entered is the absolute position in the longitudinal axis

(Z axis).

Groove width l1 This value is the groove width, which together with the value for "Reference z0"

specifies the absolute position of the edge of the groove on the side of the groove

facing away from the spindle. If the groove width setting is the same as the tool width,

and "0" is assigned to the parameters "Edge F1" and "Edge F2" (selection between

"Chamfer CHF" and "Radius RND), the tapping function is activated.

Diameter d Starting diameter for the groove. The value to be entered is the absolute position in the

transverse axis (X axis).

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 129 130

Keine Kommentare

Siemens SINUMERIK 802D sl Wartungshandbuch Seite 66