Siemens v1.0 Wartungshandbuch PDF herunterladen (Seite 143)

Example "PID control"

4.4 Load simulation block

STEP 7 Basic V10.5

Getting Started, 12/2009, A5E02651459-01

143

4.4 Load simulation block

Introduction

The following steps show you how to load the block "PROC_C" in the example project. The

block simulates the input and output values of the PID controller. To use these, load a library

in the example project and create the block in the second network.

Requirements

The organization block "PID [OB200]" is open in the project view.

Procedure

To open the library and copy the block, follow these steps:

1. Copy the file "Simulation Program PID.ZIP" from the following Internet address to your

local hard disk and extract the file.

http://support.automation.siemens.com/WW/view/en/40263542

Click on "Info" to see the ZIP files.

2. Extract the file "Simulation Program PID.ZIP".

3. Use the "Libraries" task card to open the global library "Simulation" from the directory of

the extracted file.

The library is loaded.

1 2 ... 138 139 140 141 142 143 144 145 146 147 148 ... 201 202

Keine Kommentare

Siemens v1.0 Wartungshandbuch Seite 143