Siemens v1.0 Wartungshandbuch PDF herunterladen (Seite 186)

Example "Motion"

5.6 Expand HMI screen

STEP 7 Basic V10.5

186 Getting Started, 12/2009, A5E02651459-01

9. Assign the "Position_Bottle_2" tag to the "Simulate Tag" function.

Result

You have created an animation that visualizes the motion of the second bottle from the first

to the second conveyor.

In the next section you will change the visibility settings of the bottles on the conveyor.

5.6.3 Connect HMI objects with motion instruction

Introduction

The following steps show you how to animate the visibility of the bottles in the HMI screen

dependent on the program progress.

For the visibility settings, use the signal state at the "Busy" parameter of the

"MC_MoveRelative" instruction. The parameter contains information on whether the motion

control instruction will be executed or not in that moment.

Requirements

● The "MC_MoveRelative" instruction has been inserted in the "Main [OB1]" organization

block.

● The HMI screen is open.

● The motion animation has been created for the second bottle.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 201 202

Keine Kommentare

Siemens v1.0 Wartungshandbuch Seite 186