Siemens KDN Series Betriebsanleitung PDF herunterladen (Seite 181)

KINCO

181

Editing Macro, please refer to the type table:

N32 Double

FN Float

DTN Float

UTN Float

Input Float

SetPoint Float

Output Float

Gain Float

Tune I Float

Tune D Float

PID

Mode Double

IN BIT

QN BIT

PIN Float

PQN Float

NT Double

FT Float

B BIT(the attribute of B is the same as N32 in the PLC software)

BT BIT(the attribute of BT is the same as NT in the PLC software)

Note：

1、 The configuration in OPTO 22 software must be the same as the configuration in

EV5000 software：

true：e.g.: define Float in the OPTO 22 software，F1

Select FN device in the EV5000 software, address: 1.

Communicate correctly

error：e.g.: define Float in the OPTO 22 software，F0001

Select FN device in the EV5000 software, address: 1.

Communicate error

2、 PIDSN correspondence

If it set up PID1 in the OPTO 22 software, it can show the values of Input, SetPoint, Output,

Gain, Tune I, Tune D, and Mode.

In the Ev5000 software, PIDSN format DDDDD.DD, Address can be written in 1.**.( the main

address in front of decimal point corresponding to the OPTO 22 of PID1 1 ,sub-addr refer to

the table. the table as follows:

Sub Address（Example PID1，1 is sub address） Corresponding Value

1.00 Input

1.01 SetPoint

1.02 Output

1.03 Gain

1.04 Tune I

1.05 Tune D

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 257 258

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens KDN Series Betriebsanleitung Seite 181

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Siemens KDN Series