Siemens KDN Series Betriebsanleitung PDF herunterladen (Seite 74)

KINCO

Note：The correspondence between the device of EV5000 and the s7-300 software, as follows:

4X-DINV------------PID

e.g.：4X-DINV1------------PID256 4X-DINV3------------PID260

3X-DINV------------PQD

e.g.：3X-DINV1------------PQD256 3X-DINV3------------PQD260

4X -------------------PIW

e.g.：4X1 --------------------PIW256 4X2--------------------PIW258

3X--------------------PQW

e.g.：3X1---------------------PQW256 3X2---------------------PQW258

0X--------------------I

e.g.：0X1--------------------I0.0 0X9--------------------I1.0

1X--------------------Q

e.g.：1X1--------------------Q0.0 1X9--------------------Q1.0

4X_BIT -------------------PIW（binary）

e.g.：4X_BIT1.0~~1.15-------------------PIW256（binary）

3X_BIT--------------------PQW（binary）

e.g. ：3X_BIT1.0~~1.15--------------------PQW256（binary）

PLC software setting

Setup the GSD in the S7-300 software

Procedure ：

（1）.Close all stations in “HW Config”.

（2）.And select “option”-->”setup GSD”.

（3）. In the “installation *.GSD file” dialog box, select Source: folders contain *. GSD file, or

the STEP 7 project contain *. GSD file

（4）.Select one or more files from *.GSD file list, and then click on "install" button.

Copy the icon (. BMP file) to the relevant path, such as BRIDGE product：Bitmap_Device

= "EVIEW", that copy the "EVIEW" BMP file to the relevant path: c:\siemens\step7\s7data\nsbmp

or c:\siemens\cpbv51\bitmaps

After installation, you can find the appropriate symbol in "PROFIBUS DP\GATWAY".

Project configuration

（1）Use the guide to set up projects in the s7-300 software.

（2）Double click “DP” of "HW Config"->attribute->new

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 257 258

Keine Kommentare

Siemens KDN Series Betriebsanleitung Seite 74