Siemens KDN Series Betriebsanleitung PDF herunterladen (Seite 213)

100

101

KINCO

213

Siemens S7-300/400 (via MPI port) driver protocol

1. This drive only comport the HMI with MPI port. Don’t support indirect online and direct online

simulation.

2. MPI is RS485 port, so we can use this drive to communicate between many HMI and PLC,

and then we must set the master station No..

3. HMI station No. can be 0~15, PLC station No. must be 0~15, the station No. of HMI and

PLC can not be the same number.

4. PLC baud rate is 187500.

5. You must set DB first, or register can not write（DB.DBX, DB.DBW, DB.DBD）. The initial

address of DBm.DBW and DBm.DBD must be even.

6. T/C register must be readonly.

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 257 258

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens KDN Series Betriebsanleitung Seite 213

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Siemens KDN Series