Siemens KDN Series Betriebsanleitung Seite 243

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 258
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 242
KINCO
243
When connecting multiple instruments, for distinguishing instruments, each instrument must
be set C84 value with a different parameter. .
3Must press “FUNC+PARA” to set the parameter
4PROG. have 19 numbers and SEG have 30 numbers, press DOWN key (sub) and PROG key
(add) to change program number
5Press “FUNC+PROG” to change the program.----every program must be set firstly and then
communicate will be ok, or else “PLC Response Error” will print;
6After “RUN/HLD” light on, many parameters can’t be modified(e.g. SET) In order to reset, press
“ PROG+RUN/HOLD” .
Modify the parameter at the state of “DISP”, not at the state of “INPUT”
7On the temperature controller, time parameters show number with sexagesimal.
Example it shows 2222 on the screen, but on the controller panel shows
37.02-----37.00*60+2=2222
8PROG’s address setting
FBR1_R indicates prog 1. (e.g. PROG 1) format: DDD.DD. Main address DDD indicates seg
No, subaddress DD indicates parameter value, the correspondence as follows
ExampleFBR1_R address 11.10 indicates PROG 1,SEG 1,T1 2nd
Sub addr DD correspond to temperature controller
Sub Addr Parameter Sub Addr Parameter
.0 SP .12 T2 2nd
.1 TM .13 T3 1st
.2 NoneSkip .14 T3 2nd
.3 EV1 .15 T4 1st
.4 Blank .16 T4 2nd
.5 EV2 .17 T5 1st
.6 Blank .18 T5 2nd
.7 EV3 .19 PID
.8 Blank .20 NoneSkip
.9 T1 1st .21 9.5.
.10 T1 2nd .22 9.5.to
.11 T2 1st
SDC36Please refer to the manual of yamatake SDC36 for details
Device Bit Address Word Address Format Notes
Data Register ———— 4X 0-65535 DDDDD
DMCPlease refer to the manual of DMC-SPL for details, in 10-8 communication parameters
Device Bit Address Word Address Format Notes
Data Register ———— 4X 1002-65535 DDDDD
Address add 1 to the list of
communication parameters
Example: ch1 pv is according to 4x1005 in the EV5000.
Seitenansicht 242
1 2 ... 238 239 240 241 242 243 244 245 246 247 248 ... 257 258

Kommentare zu diesen Handbüchern

Keine Kommentare