Siemens C10 Betriebsanweisung PDF herunterladen (Seite 101)

HWC_VNSConfiguration.fm

A31003-W1010-A100-1-7619, July 2005

HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide

Virtual Network configuration

Multicast for a VNS

7.6 Multicast for a VNS

A mechanism that supports multicast traffic can be enabled as part of a VNS definition. This is

provided to support the demands of VoIP and IPTV network traffic, while still providing the

network access control.

In the Multicast screen, you define a list of multicast groups whose traffic is allowed to be

forwarded to and from the VNS. The default behavior is to drop the packets. For each group

defined, you can enable Multicast Replication by group.

1. In the Virtual Network Configuration screen, highlight the VNS name and click on the

Multicast tab. The Multicast screen for this VNS appears.

2. To enable the multicast function, click the Enable Multicast Support checkbox on.

3. Define the multicast groups by clicking one of the radio buttons:

● IP Group: Key in the IP address range

● Defined groups: select from the drop-down list.

4. Click on the Add button. The group appears in the list above.

5. To enable the defined multicast replication for this group, click the Wireless Replication

checkbox on.

6. To modify the priority of the multicast groups, highlight the group row and click the Up or

Down buttons.

7. A “Deny all” rule is automatically added as the last rule (IP = *.*.*.* and the Replication box

left unchecked). This ensures that all other traffic is dropped.

8. To save these settings, click on the Save button.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 249 250

Keine Kommentare

Siemens C10 Betriebsanweisung Seite 101