Siemens C10 Betriebsanweisung Seite 90
- Seite / 250
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Virtual Network configuration
A31003-W1010-A100-1-7619, July 2005
88 HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide
HWC_VNSConfiguration.fm
RADIUS Policy for a VNS
● RADIUS Accounting: enables the HiPath Wireless Controller to generate an "accounting
request packet" with an "accounting start record" after successful login by the wireless
device user and an "accounting stop record" based on session termination. The HiPath
Wireless Controller sends the accounting requests to a remote RADIUS server.
HiPath Wireless Controller Accounting creates Call Data Records (CDRs) in a standard format
of user session information, such as start time and duration of session. The CDRs are stored
in flat files that be downloaded via the CLI.
If you enable RADIUS Accounting, you need to specify a RADIUS accounting server.
Enable and configure accounting methods for this VNS
1. In the Virtual Network Configuration screen, click on the Auth & Acct tab. The
Authentication screen appears, for the highlighted VNS.
2. In the RADIUS Accounting area of the screen, to enable HiPath Wireless Controller
Accounting, click the Collect Accounting Information checkbox on.
3. From the drop-down list of RADIUS servers that were defined in the Global Settings
screen, select the server you wish to use for RADIUS accounting. Click on the Use button.
The Acct. portion of the screen displays the information about this server, and it is no
longer available in the list.
4. Click the Use server for Accounting checkbox on.
5. Fill in the fields as described above for the Authentication server.
6. Type in the RADIUS Accounting Interim Interval. Interim accounting records are sent out
if the interim time interval is reached before the session ends. The default is 60 minutes.
7. To save this configuration, click on Save.
7.4 RADIUS Policy for a VNS
The next step is to define the Filter ID values for a VNS. These Filter ID values must match
those set up on the RADIUS servers.
- HiPath Wireless 1
- Convergence Software, V3.0 1
- *1PA31003-W1010-A100-1-7619* 2
- Content 0 3
- HWC_User_GuideTOC.fm 4
- 1 About this Guide 7
- 1.3 Formatting conventions 8
- 1.4 Documentation feedback 9
- 1.5 Protocols and standards 9
- 1.6 Regulatory information 9
- 1.6.1 Safety 9
- 1.6.2 Emissions 10
- 1.6.3 Radio 10
- 1.6.4 Other Approvals 11
- About this Guide 12
- Regulatory information 12
- Software solution 13
- HWC_Intro.fm 14
- 2.2.2 Network traffic flow 20
- 2.2.3 Network security 21
- 2.2.7 Mobility and roaming 23
- 2.2.8 Availability 24
- HWC_Startup.fm 26
- Software configuration 33
- 4.2 Enabling the product key 34
- 4.3 Setting up the data ports 35
- HWC_SoftwareConfig.fm 36
- 4.4 Setting up static routes 37
- 4.5 Setting up OSPF Routing 39
- 5 Wireless AP: startup 45
- HWC_APStartup.fm 46
- 5.5.1 Discovery steps 50
- Wireless AP: startup 64
- 6.1 Overview 65
- 6.2 What is a VNS? 66
- 6.3 Topology of a VNS 67
- HWC_VNSIntro.fm 68
- 6.5 Filtering for a VNS 69
- 6.7 Setting up a new VNS 71
- 6.8 Global Settings for a VNS 73
- 7.1 Topology for a VNS 75
- 7.2 Authentication for a VNS 80
- 7.3 Accounting for a VNS 89
- 7.4 RADIUS Policy for a VNS 90
- 7.5 Filtering rules for a VNS 92
- HWC_VNSConfiguration.fm 100
- 7.6 Multicast for a VNS 101
- 7.7 Privacy for a VNS 102
- 7.9 A VNS for voice traffic 107
- Virtual Network configuration 110
- A VNS for voice traffic 110
- Availability and Mobility 111
- 9.1 Management users 119
- 9.2 Network time 120
- 9.3 Check Point event logging 121
- HWC_ControllerConfig.fm 122
- 9.4 Setting up SNMP 123
- 9.4.1 MIB support 123
- Setting up SNMP 126
- HWC_3rdPartyAPs.fm 128
- 11.1 Overview 131
- HWC_Mitigator.fm 132
- 11.3 Mitigator: running scans 133
- 11.4 The Analysis Engine 135
- 12 Ongoing operation 141
- HWC_Ongoing.fm 142
- 12.2.1 Client disassociate 144
- 12.2.2 Client blacklist 145
- 12.5 Reports and displays 154
- 12.5.1 View displays 154
- 12.5.2 View reports 156
- 13 Glossary 157
- HWC_Glossary.fm 158
- A.2 Wireless AP system states 180
- HWC_AppendixA.fm 181
- Wireless AP system states 182
- B CLI command reference 183
- HWC_AppendixB.fm 184
- CLI command reference 188
- HWC_AppendixC.fm 190
- D.1 RFC list 193
- HWC_AppendixD.fm 194
- D.2 802.11 standards list 195
- Reference lists of standards 196
- 802.11 standards list 196
- E Support for Wireless AP 197
- HWC_AppendixE.fm 198
- F RADIUS Attributes 199
- F.2 RADIUS Accounting 200
- F.2.1 Account-Start Packet 200
- HWC_AppendixF.fm 201
- F.2.3 Termination Codes 202
- G Logs and Events 203
- G.2 Critical 204
- G.2.1 ACCESSPOINT 204
- HWC_AppendixG.fm 205
- G.2.2 CDR_COLLECTOR 209
- G.2.3 CONFIG_MANAGER 211
- G.2.4 EVENT_SERVER 212
- G.2.5 LANGLEY 214
- G.2.6 RADIUS_ACCOUNTING 214
- G.2.7 RADIUS_CLIENT 215
- G.2.8 RF_DATA_COLLECTOR 216
- G.2.9 RU_MANAGER 217
- G.2.10 SECURITY_MANAGER 218
- G.2.11 STARTUP_MANAGER 219
- G.2.12 STATS_SERVER 221
- G.2.13 VNMGR 222
- G.3 Major 225
- G.3.1 ACCESSPOINT 225
- G.3.2 CDR_COLLECTOR 226
- G.3.3 CLI 228
- G.3.4 CONFIG_MANAGER 229
- G.3.5 CPDP_AGENT_ID 230
- G.3.6 EVENT_SERVER 230
- G.3.7 LANGLEY 232
- G.3.8 NSM_SERVER 233
- G.3.9 OSPF_SERVER 234
- G.3.10 PORT_INFO_J_MANAGER 234
- G.3.11 RADIUS_ACCOUNTING 234
- G.3.12 RADIUS_CLIENT 235
- G.3.13 REDIR_ID 235
- G.3.14 RF_DATA_COLLECTOR 236
- G.3.15 RU_MANAGER 236
- G.3.16 SECURITY_MANAGER 237
- G.3.17 VNMGR 239
- Logs and Events 242
- HWC_User_GuideIX.fm 243
- Nur für den internen Gebrauch 244
- Printed in Germany 250
Verwandte Produkte und Handbücher für Mobiltelefone Siemens C10
Mobiltelefone Siemens A75 Bedienungsanleitung
(17 Seiten)
(17 Seiten)
Mobiltelefone Siemens CV65 Betriebsanweisung
(73 Seiten)
(73 Seiten)
Mobiltelefone Siemens SP65 Betriebsanweisung
(145 Seiten)
(145 Seiten)
(112 Seiten)
Mobiltelefone Siemens 4000i Wartungshandbuch
(240 Seiten)
(240 Seiten)
Mobiltelefone Siemens C70 Betriebsanweisung
(76 Seiten)
(76 Seiten)
Mobiltelefone Siemens C55 Betriebsanweisung
(137 Seiten)
(137 Seiten)
Mobiltelefone Siemens C11 Bedienungsanleitung
(14 Seiten)
(14 Seiten)
Mobiltelefone Siemens 1168 Betriebsanweisung
(79 Seiten)
(79 Seiten)
Mobiltelefone Siemens Gigaset S675 Spezifikationen
(186 Seiten)
(186 Seiten)
Mobiltelefone Siemens MC60 Betriebsanweisung
(118 Seiten)
(118 Seiten)
Mobiltelefone Siemens Hicom 118 Wartungshandbuch
(334 Seiten)
(334 Seiten)
Mobiltelefone Siemens CF75 Bedienungsanleitung
(76 Seiten)
(76 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.650 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern