Siemens C10 Betriebsanweisung PDF herunterladen (Seite 102)

Virtual Network configuration

A31003-W1010-A100-1-7619, July 2005

100 HiPath Wireless Controller, Access Points and Convergence Software V3.0: User Guide

HWC_VNSConfiguration.fm

Privacy for a VNS

7.7 Privacy for a VNS

7.7.1 Privacy for a VNS for Captive Portal

For the Captive Portal VNS, there are three options for the Privacy mechanism:

● None

● Static Wired Equivalent Privacy (WEP) keys for a selected VNS, so that it matches the

WEP mechanism used on the rest of the network. You can assign each radio on a Wireless

AP to up to four VNSs by SSID. For each VNS, only one WEP key can be specified.

Controller, Access Points and Convergence Software always uses the first key (key index

0).

● Wi-Fi Protected Access (WPA) privacy in PSK mode, using a Pre-Shared Key (PSK), or

shared secret for authentication. WPA a new security solution that adds authentication to

enhanced WEP encryption and key management. WPA in PSK mode does not require an

authentication server (suitable for home or small office).

Configure Privacy by static WEP for a Captive Portal VNS

1. In the Virtual Network Configuration screen, highlight the VNS name and click on the

Privacy tab. For a VNS with SSID network assignment, the Captive Portal version of the

Privacy screen appears.

2. For no privacy mechanism on this VNS, click on the None radio button.

3. To configure static keys for WEP, click on the Static Keys (WEP) radio button.

4. From the drop-down list, select the WEP Key Length: 40-bit, 104-bit, 128-bit

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 249 250

Keine Kommentare

Siemens C10 Betriebsanweisung Seite 102