Siemens DTU3005-B Betreibershandbuch PDF herunterladen (Seite 15)

4 Creating Project Files — Profibus to Devices

Siemens Energy & Automation, Inc. 11

4 Creating Project Files

— Profibus to Devices

This chapter covers how to configure the DTU3005P

for Profibus communications with Siemens devices.

Once you have created a project (see Chapter 3),

follow the directions in this chapter to configure the

project file. When you have finished, see Chapter 5

for directions on downloading the project to the

DTU3005P.

4.1 Configuring the Project File

After you have created or opened the project file,

select Edit from the main menu and the following

menu items are displayed (see Figure 4.1):

• Port 1 (Profibus)—configures the communica-

tions settings for the Port 1 connection to the

Profibus network.

• Port 2 (Devices)—configures communications

settings for SEAbus devices or Siemens protec-

tive relays connected to Port 2.

• Port 3 (Passthrough)—configures Port 3 as a

passthrough to the devices on Port 2.

• Device Defaults—sets the default data

registers for each device type, e.g., set the

defaults for all 4720 power meters or all S7-I/O

units. The data registers can still be customized

for each device, as required (see Section 4.5).

• Device List—configures list of SEAbus devices

or Siemens Protective relays connected to Port

Figure 4.1 Contents of the Edit Menu

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 119 120

Keine Kommentare

Siemens DTU3005-B Betreibershandbuch Seite 15