Machining the machining step program manually
6.3 Simulate machining
Manual Machine Plus Turning
Programming and Operating Manual, 06/2009, 6FC5398-6CP10-1BA0
117
6.3 Simulate machining
Function
You can use this function to graphically display the execution of the program on the screen,
in order to easily control the programming result without moving the machine axes.
Operating sequences
The start screen is opened.
The simulation of the part program can be reproduced on the HMI using the following two
functions:
● Standard simulation
The execution of the part program is simulated on the HMI by considering the axis
feedrates. In the case of more extensive NC programs, the simulation may, therefore,
take more time.
● Contour simulation
Execution of the part program is simulated on the HMI. The simulation is based on pure
calculations and is, therefore, faster in the case of more extensive NC programs.
Standard simulation
The execution of the part program is simulated with this function on the HMI by considering
the axis feedrates.
Figure 6-15 Standard simulation
Press <NC START> to start the standard simulation for the selected part program.
6LPX
ODWLRQ
6WDQGDUG
VLPXODWLRQ
Kommentare zu diesen Handbüchern