Siemens IEEE802.11 Betriebsanleitung PDF herunterladen (Seite 180)

Configuring with Web Based Management

5.5 "System" menu

SCALANCE W770/W730 to IEEE 802.11n Web Based Management

180 Configuration Manual, 11/2014, C79000-G8976-C323-03

Procedure

Enabling function

1. Select the "Syslog Client" check box.

2. Click the "Set Values" button.

Creating a new entry

1. In the "Server IP Address" input box, enter the IP address or the FQDN name of the

Syslog server on which the log entries will be saved.

2. Click the "Create" button. A new row is inserted in the table.

3. In the "Server Port" input box, enter the number of the UDP port of the server.

4. Click the "Set Values" button.

Note

The default setting of the server port is 514.

Changing the entry

1. Delete the entry.

2. Create a new entry.

Deleting an entry

1. Select the check box in the row to be deleted.

2. Click the "Delete" button. All selected entries are deleted and the display is refreshed.

5.5.15

Fault Monitoring

5.5.15.1

Power Supply

Settings for monitoring the power supply

Configure whether or not the power supply should be monitored by the messaging system.

Depending on the hardware variant there are one or two power connectors (Line 1 / Line 2)

and a PoE power supply. With a redundant power supply, configure the monitoring

separately for each individual feed-in line.

A fault is then signaled by the message system when there is no power on a monitored line

(Line 1, Line 2 or PoE) or when the applied voltage is too low.

Note

You will find the permitted operating voltage limits in the operating instructions of the device.

1 2 ... 175 176 177 178 179 180 181 182 183 184 185 ... 291 292

Keine Kommentare

Siemens IEEE802.11 Betriebsanleitung Seite 180