Siemens IEEE802.11 Betriebsanleitung Seite 226

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 292
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 225
Configuring with Web Based Management
5.7 "Layer 2" menu
SCALANCE W770/W730 to IEEE 802.11n Web Based Management
226 Configuration Manual, 11/2014, C79000-G8976-C323-03
Description
The page contains the following boxes:
"Base Bridge Mode" drop-down list
Specify whether or not the device is configured as a bridge according to IEEE 802.1D for
the Spanning Tree protocol or according to IEEE 802.1Q for a virtual bridged LAN:
802.1 D Transparent Bridge
Sets the mode of the device to "transparent" for the Spanning Tree protocol.
802.1 Q VLAN Bridge
Sets the mode of the device to "VLAN-aware" for a virtual bridged LAN. Configure the
port-based VLAN
Input box "VLAN ID"
Enter the VLAN ID in the "VLAN ID" input box.
Range of values: 1 ... 4094
The table has the following columns:
Select
Select the check box in the row to be deleted.
VLAN ID
Shows the VLAN ID. The VLAN ID (a number between 1 and 4094) can only be assigned
once when creating a new data record and can then no longer be changed. To make a
change, the entire data record must be deleted and created again. Up to 8 VLANs can be
defined.
Name
Enter a name for the VLAN. The name only provides information and has no effect on the
configuration. The length is a maximum of 32 characters.
Status
Shows the status type of the entry in the port filter table. Here, static means that the
address was entered as a static address by the user.
List of ports
Specify the use of the port. The following options are available:
"-"
The port is not a member of the VLAN.
With a new definition, all ports have the identifier "-".
M
The port is a member of the VLAN. Frames sent in this VLAN are forwarded with the
corresponding VLAN tag.
U (uppercase)
The port is an untagged member of the VLAN. Frames sent in this VLAN are
forwarded without the VLAN tag. Frames without a VLAN tag are sent from this port.
u (lowercase)
The port is an untagged member of the VLAN, but the VLAN is not configured as a
port VLAN. Frames sent in this VLAN are forwarded without the VLAN tag.
F
The port is not a member of the specified VLAN. You can configure other settings in
"Layer 2 > VLAN > Port-based VLAN".
Seitenansicht 225
1 2 ... 221 222 223 224 225 226 227 228 229 230 231 ... 291 292

Kommentare zu diesen Handbüchern

Keine Kommentare