Siemens Sinumerik 810T Bedienungsanleitung PDF herunterladen (Seite 20)

EMCO WINNC SINUMERIK 810/820 T

B 8

BASICS

Note

With drilling tools (type 10) L1 is the length of the tool

in Z direction.

Tool Data Measuring with the

Optical Presetting Device

Tool data measuring with the optical presetting device

occurs in principle in the same way like with scraping.

The optical way is more precise because touching

will be avoided and the tool is displayed enlarged in

the optics.

Manual Calculation

• Mount the optical presetting device in the working

area in a way, that the measuring point can be

reached with the reference tool and with all tools

to be measured.

• Select the mode JOG

• Mount the reference tool at station 1 of the tool

turret

• Swivel in station 1

• Traverse the tip of the reference tool into the

reticule of the optics.

Note: An object viewed through the optics is

mirrored in the X and Z axis.

• Read and note actual slide position displayed at

the screen..

• The tip of the reference tool is at X height of the

tool mount reference point N and in Z direction

30 mm (PC TURN 50/55/155) or 22 mm (PC

TURN 120/125: 20 mm tool length + 2mm

outstanding length of the holder) in front of N.

= Z-30 or Z-22 X

= X

• Swivel tool turret and traverse with the first tool to

be measured into the reticule.

• The difference between the old position of the tool

mount reference point (X

, Z

) and the new position

are the tool offsets L1, L2.

The X values are in diameter and must be halved

because L1 is a radius value.

• Clamp next tool etc.

Automatic Calculation

• Traverse with the reference tool into the reticule.

• The tip of the reference tool is in X at the position

of the tool mount reference point N, in Z 30 mm

(PC TURN 50) or 22 mm (PC TURN 120: 20 mm

tool length + 2mm outstanding length of the holder)

in front of N.

= Z-30 or Z-20 X

= X

• Store the coordinates X

and Z

in a zero offset

(G54-G57).

• Swivel in the first tool.

• Traverse into the reticule with the first tool.

• Enter the type (cutter position) and the cutter

radius for the respective tool offset.

• Select Softkey TO AUTOM.

• Enter tool offset number, ZO no. = (54-57) (not 53)

and press the softkeys STORE X-AXIS and

STORE Z-AXIS.

• Traverse the next tool into the reticule etc.

Traverse into the graticule with the tool

Reference tool measuring Concept Turn 105/155

Reference tool measuring Concept Turn 50/55

CONCEPT Turn 50/55 CONCEPT Turn 105/155

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens Sinumerik 810T Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Siemens Sinumerik 810T