Siemens Sinumerik 810T Bedienungsanleitung PDF herunterladen (Seite 28)

EMCO WINNC SINUMERIK 810/820 T

C 8

OPERATING SEQUENCES

Adjusting the Serial Interface

• For transmission the interfaces of sender and

receiver have to be set similar.

• Select SETTING DATA - SETTING BITS with

softkeys.

Settings:

Baudrate 110, 300, 600, 1200, 2400,

4800, 9600, 19200

Parity E, O, N

Stop bits 1, 2

Data bits 7, 8

Data transmission from / to original control in ISO-

Code only.

ISO: 7 Data bits, Parity even (=E)

Control parameter:

Bit 0: 1...Transmission will be ceased only with ETX-

(End of Transmit) Code (not with M30,

M17, M2) - this enables transmitting several

programs in one sequence

Bit 7: 1...Overwrite part program without message

0...Message, if a program is already existing

ETX character code:

free setable, has to be conform with the code set at

the CNC

Settings at the original control 810/820 with

SETTING DATA - SETTING BITS:

5010 - 5013: first interface

5018 - 5021: second interface

5028: ETX sign

5010, 5012: 00000000

5011, 5013: 11000xxx

coded baud rate:

001: 150 bd 010: 300 bd 011: 600 bd

100: 1200 bd 101: 2400 bd 110: 4800 bd

111: 9600 bd

Input pattern for adjusting the serial interface

NOTE

When you use an interface expansion card (e.g. for

COM 3 and COM 4), take care that for every interface

a separate interrupt is used (e.g.: COM1 - IRQ4,

COM2 - IRQ3, COM3 - IRQ11, COM4 - IRQ10).

WinNC Sinumerik T (c) EMCO

F3 F4 F5 F6 F7

AUTOMATIC

PARAMETERS OF SERIAL INTERFACES

Baudrate

Parity

Stopbits

Databits

Control parameter

ETX-Character code

COM1

9600

COM2

9600

00000000

00000011

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 89 90

Kommentare zu diesen Handbüchern

Keine Kommentare

Siemens Sinumerik 810T Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Siemens Sinumerik 810T