Siemens Sinumerik 810T Bedienungsanleitung PDF herunterladen (Seite 41)

EMCO WINNC SINUMERIK 810/820 T

D 9

PROGRAMMING

G40 Cancel Cutter Radius

Compensation

The cutter radius compensation will be cancelled by

G40.

Cancellation is only permitted with a linear traversing

command (G00, G01).

G00 or G01 can be programmed in the same block or

as the first traversing movement after cancellation.

G40 is programmed frequently in the block with

return to the tool change position.

G41 Cutter Radius

Compensation Left

If the programmed tool path (viewed in the direction

of machining) is on the left of the material to be

machined, the cutter radius is to be selected with

G41.

Note

• No direct change between G41 and G42 - cancel

with G40 previously.

• Cutter radius R and cutter position (tool type) must

be defined.

• Selection is only permitted in conjunction with G00

or G01.

• Change of the tool correction is not possible while

cutter radius compensation.

G42 Cutter Radius

Compensation Right

If the programmed tool path (viewed in the direction

of machining) is on the right of the material to be

machined, the cutter radius is to be selected with

G42.

Note see G41!

Definition G41 cutter radius compensation left

Definition G42 cutter radius compensation right

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 89 90

Keine Kommentare

Siemens Sinumerik 810T Bedienungsanleitung Seite 41